Autumn check for your flat commercial roof: how to prevent leaks and water damage this winter
Autumn check for your flat commercial roof: how to prevent leaks and water damage this winter
The leaves are starting to fall. Time to give your commercial roofs some extra attention too!
The first autumn storm sweeps across the industrial estate. A few days later, there's a bucket in the warehouse, under a dark stain on the ceiling. Anyone who manages a commercial building knows how this goes. The problem rarely starts on that one night: usually, a weak spot has been sitting in the roof for months, unnoticed during the dry summer.
In autumn, everything comes together. Persistent rain, strong gusts and falling leaves put a flat commercial roof under extra strain. Outlets get blocked, water lies on the roof for longer, and small defects in seams or junctions get the chance to let water through.
A well-maintained roof protects more than just the roof covering. It keeps the insulation dry, protects machinery, stock and electrical installations, and keeps your business running as usual. That's why autumn is the time to have your flat commercial roof thoroughly checked, before winter sets in.
Why autumn is a critical time for your flat commercial roof
In summer, rainwater evaporates quickly and small defects often go unnoticed. In autumn, it rains longer and more often, the roof dries more slowly and a lot of organic material blows onto the roof surface. As a result, existing weak spots show up much sooner.
The main risks at a glance:
- Prolonged downpours keep the roof under water for hours and expose weak spots that caused no problems in dry weather.
- Leaks develop through damaged roof covering or seams and laps that have come loose.
- Water ingress through details: roof edges, wall junctions, upstands, rooflights and roof penetrations are the most vulnerable areas of a flat roof.
- Blocked rainwater outlets caused by leaves, branches and debris, especially after an autumn storm.
- Blocked scuppers and emergency overflows, leaving excess water with nowhere to go when the main drainage can't cope.
- Ponding on the roof surface: standing water puts extra load on the roof structure and keeps working on seams and junctions for longer.
- Small damage that grows: with rain, frost and temperature changes, a minor defect can develop into a bigger problem over the winter.
A roof problem rarely stays on the roof. Water that gets in can saturate the insulation, so it insulates less effectively. Below that, ceilings, lighting, electrical installations, machinery and stored goods can all be damaged. In a production hall or warehouse, a single leak can even put an area temporarily out of use and disrupt your business operations.
Autumn check: how to get your flat commercial roof ready for winter
This step-by-step plan helps facility managers and building managers understand what an autumn roof inspection focuses on. It is not a DIY guide: accessing, cleaning and repairing the roof is a job for a specialist roofing company (see below).
Step 1. Check the rainwater outlets
The roof outlets are the heart of the drainage system. With every shower, leaves, branches, moss and other debris wash towards the outlets and can gradually clog them.
- Check that all roof outlets are clear.
- Remove leaves, branches, moss and debris around and inside the outlet.
- Also check the leaf guards (outlet grates) and any outlet sumps.
If an outlet is blocked, the water can't drain away and stays on the roof surface. This increases the load on the roof structure and leaves water working on seams and junctions for longer. Please note: when a fully blocked outlet is cleared, the sudden surge of water can dislodge the downpipe. That's another reason why this is a job for a professional.
Step 2. Remove leaves and other debris
Leaves and organic material build up mainly in corners, along roof edges and upstands, and around technical installations such as HVAC units and solar panels.
- Have accumulated leaves and organic material removed.
- Pay extra attention to corners, roof edges and areas around technical installations.
Accumulated debris hinders drainage and traps moisture against the roof covering. Over time, it becomes a breeding ground for moss, algae and even plant growth. If your building is in a wooded area, more than one clean per autumn is often needed. Do branches from trees on or next to your site hang over the roof? Have them pruned in good time. They add more leaves to the outlets and can snap off in an autumn storm, damaging the roof covering, roof edges or outlets.
Step 3. Check the emergency overflows and scuppers
Emergency overflows and scuppers are the backup route for rainwater. If the main outlet gets blocked, or more rain falls than it can handle, they carry the excess water away. This stops the water from rising on the roof and overloading the roof structure.
- Check that emergency overflows and scuppers are clear and undamaged.
- Keep them free of leaves and debris, just like the main outlets.
In autumn, when the main outlet is most likely to get blocked, a working emergency overflow is especially important.
Step 4. Look out for ponding and standing water
Small puddles after a shower are not unusual on a flat roof and are not a problem in themselves. Large puddles that stay for a long time, however, do need attention.
- After a shower, check whether large puddles remain on the roof, and whether they're still there after a few dry days.
- Note where the puddles are: at an outlet, along seams, near upstands or in the middle of the roof surface.
Persistent ponding can point to a blocked outlet, insufficient falls or local sagging of the roof. Have a roofing expert investigate the exact cause and whether action is needed, as that depends on the type of roof, its build-up and its structure.
Step 5. Inspect the roof covering
The roof covering itself is exposed to UV radiation, temperature changes, moisture and dirt all year round. During the autumn check, look out for:
- visible cracks, splits and other damage;
- seams and laps that have come loose;
- blisters and bubbles in bituminous roofing: these can point to moisture or air under the membrane, or to a leak;
- damage to the top layer, such as slate chippings that have washed off or granules drifting towards the outlets.
Each material has its own points to watch. With bitumen, these include blistering and the condition of the protective top layer. With EPDM, the weak points are mainly the seams, the finishing of cut edges and the junctions with outlets and upstands. On older PVC roofs, the membrane can shrink, which can pull upstands away from the wall or the outlet. A roofing expert knows exactly where to look for each material.
Step 6. Check junctions and roof details
Most leaks don't start in the middle of the roof surface, but at the details: the places where the roof covering ends, turns upwards or has to go around something.
- Roof edges and roof edge trims: are they still firmly fixed? In autumn, the wind pulls at them even harder.
- Junctions with walls and upstands.
- Junctions around rooflights, roof penetrations and technical installations.
- Sealant joints and seals: are they cracked, dried out or loose?
Has work been carried out on the roof in the past year, for example on technical installations? Then have the roof covering and the junctions in those areas checked with extra care.
Step 7. Watch out for moss and algae
On a flat roof, moisture lingers for a long time in autumn, especially in shaded areas, where water stands and where leaves and debris pile up. That's where moss and algae grow most easily.
Moss and algae trap moisture against the roof covering, can help block outlets and make the roof surface slippery for anyone carrying out maintenance. However, don't simply remove them yourself. A pressure washer, chlorine-based products or pulling out rooted plants can damage the roof covering or cause a leak. The right cleaning method depends on the type of roof covering. In some cases, a protective treatment can help limit new growth, but have a roofing expert assess whether it's suitable for your roof covering. If you have a green roof, it's best to contact the company that installed it.
Step 8. Check the inside of the building too
Part of the autumn check takes place indoors, without going up on the roof.
- Look for damp patches, stains and discolouration on ceilings and walls.
- Watch out for mould, a musty smell or other signs of moisture.
- Look especially closely under roof penetrations, rooflights and other vulnerable junctions.
Important: the damp patch inside isn't always directly below the leak. Water can travel across or through the roof build-up before it becomes visible. Tracing the real cause is therefore a job for a roofing expert.
Check it yourself or call in a roofing expert?
As a building manager, you can pick up quite a few warning signs yourself, without going up on the roof. An initial visual check is limited to:
- damp patches, stains, mould or a musty smell inside the building;
- water that stays on the roof unusually long after rain, as far as you can see from a safe vantage point;
- overflowing gutters or water running down the façade;
- storm damage, such as roof edges that have blown loose or material on the ground.
A visual check like this is valuable, but it is no substitute for a professional technical roof inspection. A roofing expert assesses the seams, junctions, drainage and general condition of the roof covering, and also spots early-stage damage that remains invisible to the untrained eye. Where necessary, they also check whether there is moisture in the roof insulation: wet insulation insulates less effectively and often goes unnoticed for a long time.
Safety always comes first:
- Never go onto a commercial roof without the right training, fall protection and safety measures.
- Don't carry out your own repairs to the roof covering or junctions.
- Leave technical inspections, cleaning and repairs to specialist roofers.
- In doubt? Always call in a roofing expert.
Want to know what condition your commercial roof is in going into winter? Argona | ADW, Adidak and Aditoit carry out a professional roof inspection and give you a clear picture of what's in good shape, what needs attention and which work is required.
Regular roof maintenance prevents unpleasant surprises
A thorough check in autumn is a strong start, but one inspection a year isn't always enough. Roofing manufacturers such as Soprema and Derbigum recommend two inspections a year for a flat roof: one before winter, after the leaves have fallen, and one after winter to detect any frost or storm damage. If your building is surrounded by trees, or the roof is older, a more frequent schedule may be needed.
A structured maintenance approach includes:
- regular inspection of the roof covering;
- keeping rainwater outlets, scuppers and emergency overflows clear and checking them;
- removing leaves and other debris;
- checking seams, junctions and roof details;
- identifying early-stage damage in good time;
- carrying out necessary repairs;
- monitoring the general condition of the roof and any future renovation needs.
Regular maintenance can help extend the service life of the roof covering. Small defects are repaired before they turn into major damage, and your maintenance costs become more predictable. What's more, you get a clear view of how your roof is ageing, so you can plan and budget for a renovation in good time instead of being caught off guard.
Regular maintenance also matters for guarantees and insurance. Some manufacturers make their product guarantee conditional on documented regular maintenance. And if maintenance has been neglected, the contractor or insurer may dispute a damage claim. So keep the reports of every inspection and maintenance visit.
Have your commercial roof inspected by Argona | ADW
Autumn is the ideal moment: most of the leaves have fallen and there's still time to carry out repairs before winter really sets in. Argona | ADW, Adidak and Aditoit inspect your flat commercial roof, clean the outlets and roof surface, carry out the necessary repairs and monitor the condition of your roof in the long term. So you go into winter with peace of mind, and your building, installations and business operations stay protected.
Also planning work on solar panels on your commercial roof? Within the Argona Group, Argona's roofing specialists work closely with our solar installers Argona | Eco Technics and Argona | Team Green. They complement each other and know each other's work inside out. Whether we're replacing existing solar panels or installing new ones, you have a single point of contact, including for the guarantee. So there's never any discussion about who is responsible for the roof waterproofing after the panels are installed or removed.